series：
ESP32-C3
name：
WT32C3-S6
WT32C3-S6 WiFi module is a low-power and cost-effective embedded wireless network control module. It can meet the needs of IoT applications such as smart grid, building automation, security, smart home, and telemedicine. The core processor ESP32-C3 of the module integrates an industry-leading RISC-V 32-bit single-core processor in a smaller package, with a main frequency of up to 160 MHz, and an on-board PCB antenna.
| WT32C3-S6规格书V1.0.2 | 2020-08-14 |
describe
WT32C3-S6 WiFi module is a low-power and cost-effective embedded wireless network control module. It can meet the needs of IoT applications such as smart grid, building automation, security, smart home, and telemedicine. The core processor of the module, ESP32-C3, integrates an industry-leading RISC-V 32-bit single-core processor in a smaller package, with a main frequency of up to 160MHz, and an on-board PCB antenna. The module supports the standard IEEE802.11 b/g/n protocol, Bluetooth low energy 5.0 (Bluetooth LE): Bluetooth 5, Bluetoothmesh. Users can use this module to add Bluetooth distribution and networking functions to existing devices, or to build an independent network controller.
feature
Available in SMD-16 package
On-board PCB antenna
Working voltage: 3.3V
Working temperature: -20-85°C
Built-in ESP32-C3 chip, RISC-V 32-bit single-core microprocessor, main frequency up to 160MHz
SRAM 400KB
RTC SRAM 8KB
ROM 384KB
Module built-in Flash 4MB
system
WIFI
Support IEEE 802.11 b/g/n protocol
Support 1T1R mode, data rate up to 150 Mbps
WIFI @2.4 GHz, support WEP/WPA-PSK/WPA2-PSK security mode
Frame aggregation (TX/RX A-MPDU, RX A-MSDU)
Bluetooth
Bluetooth 5.0 (Bluetooth LE): Bluetooth 5, Bluetooth mesh
Rates support 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
Advertising Extensions
Multiple Advertisement Sets
Channel Selection Algorithm #2
hardware
Support GPIO, SPI, UART, I2C, I2S, IR transceiver, LED PWM controller, USB JTAG
Interface, Generic DMA Controller, TWAITM Controller (ISO11898-1 Compliant), Temperature Sensor, SAR Module
/digital converter
Support STA/AP/STA+AP working mode
Support remote OTA
