series:

ESP32

name:

WT32-SC01 Plus

 

Connect the downloader (ZXACC-ESPDB) via a USB-Type C cable. And then connect theWT32-SC01 Plus board with the downloader (ZXACC-ESPDB) through an MX1.25-7P cable. As the downloader (ZXACC-ESPDB) has automatic data flow processing capabilities, thefirmware can be downloaded automatically through the ESP32 Flash Download Tools.

 

WT32-SC01 Plus-V1.3 EN 2020-08-14

1. Connect the downloader (ZXACC-ESPDB) via a USB-Type C cable. And then connect the
WT32-SC01 Plus board with the downloader (ZXACC-ESPDB) through an MX1.25-7P cable. As the downloader (ZXACC-ESPDB) has automatic data flow processing capabilities, the
firmware can be downloaded automatically through the ESP32 Flash Download Tools.
Fig.3
2. As shown in Fig. 4: Select the firmware path at mark 1, and then fill in the burning address, usually 0X00. Note that this checkbox must be checked; Set the crystal frequency to be
40MHz at mark 2; Select 32Mbit for Flash size at mark

3; Select DIO for SPI MODE at mark 4;
Select the COM port number recognized by the computer at mark 5; Select the baud rate at
mark 6 (the higher the value is, the faster the firmware will be downloaded. Max. 1152000bps). 3. After the previous configuration, click START at mark 7 to start burning the firmware.

4. Complete the above steps, and then press the reset button on the back of the
development board to start running the firmware you just burned.

Online GUI Designer:
Users can use our online GUI designer platform, which is similar to MIT APP Inventor, to
realize the rapid GUI development with building blocks. Currently, the platform has
perfected the graphic interface development, and more driver code blocks will be further
improved in the future.

Login Page: http://8ms.xyz/login

User Manual: https://doc.smartpanle.cn/ESP32-S3/index.html