Series :
Industrial core board ARM926-CB
Name :
ARM926-CB ARM9 Core Board
Introduction
ARM926-CB is a cost-effective System-on-Module (SoM) thought of to drastically reduce the development time needed to design a low-power and low-EMI Linux Embedded device.


ARM926-CB_datasheet.pdf 2017-07-25
ARM926-DK_datasheet.pdf 2017-07-25

Description

       ARM926-CB is a cost-effective System-on-Module (SoM) thought of to drastically reduce the development time needed to design a low-power and low-EMI Linux Embedded device.The more complex hardware like CPU, RAM, Flash, Ethernet, power and EMI components are integrated on a single SMD component in just 40x40 mm (1.57x1.57 inch) using an complex six layers PCB permitting hardware designers to create their simple and cheap carrier boards.

Features

> 802.11 b/g/n

> CPU: ARM9 @ 400Mhz on Atmel AT91SAM9G25-CU 

> RAM: 128MByte DDR2 

> Flash: 128MByte Nand Flash 

> Data flash:4MByte

> LAN: 10/100 Mbit 

> USB: up to 3 host ports: 

> one hi-speed host/device 

> one hi-speed host 

> one full-speed 

> UART: up to 6 serial lines 

> I2C: up to 2 I2C buses 

> SPI: up to 2 SPI buses 

> GPIO: up to 60 GPIO lines 

> A/D: up to four channel @ 10 bit

> Software: Linux kenel version: Linux 3.6.9

Mechanical Parameters

> Power supply: single at 3.3 Volt DC 

Consumption: see consumption... 

Line level: TTL 3.3V 

Temperature range: -40 to +85 °C

Size: 40 x 40 mm (1.57x1.57 inch) 

Weight: 5g 

Pads pitch: 1.27 mm (50 mill) 

PCB layers: 6 

User configurable led on board